Frequency inverters VT1000 0,4kW-15,0kW
VT1000.. with filter is a high-performance, low-frequency inverter with a power range of 0.4-15.0kW. It has complete product protection functions, reliable quality, strong load-bearing capacity, and low-temperature rise. The product shell is smaller than in the industry and has many applications. The product's hardware design is advanced. External control applications are powerful.
TECHNICAL DATA
- “Dual digital display” keyboard.
- 485 communication, support Ethernet extension cable.
- 5 digital input terminals, support 100kHz pulse signal, support input signal polarity selection.
- One relay output.
- Support one 100kHz pulse signal output, support parameter setting “two relays”, and multi-function expansion interface support “eight relays”.
- 3 channels of analog input, A|1 and A|2 are independent, both support current 0/4-20mA or voltage 0~10V input, A|3 fixed panel potentiometer.
- One channel of voltage and current analogue output.
- Provide a +10V and +24V two-way power supply at the same time.
- Brake unit.
- Simple PLC supports PID modification settings.
- Sixteen-stage speed control.
- 4 groups of acceleration and deceleration time settings.
- VF mode supports fire emergency EPS.
- Jump frequency mode, frequency detection.
- High-frequency output supports 3000Hz.
- Run/stop timing.
- Use time timing, support random password release, and avoid malicious arrears.
- External temperature detection supports constant temperature control.
- The whole series of models will not explode in a short circuit, input and output phase loss protection, + conventional function protection.
- Support switching of parameter positions between the main display and auxiliary display, and support arbitrary selection of display target content.
- One drag four constant pressure+auxiliary pump functions, supporting arbitrary selection mode.
- Integrated one drag four constant + auxiliary pump operation status display.
- Support low-power single-phase 230V boost, three-phase 400V.
- Support the modification or addition of functional items, focus on meeting specific users and partners, customise differentiated special products, and facilitate coverage of wider market needs.
