Controller ECS10-PWM IP54
The controller ECS10-PWM IP54 is designed to control EC (electronically commutated) motor rotating speed or to control other devices by changing control signals 0-10 VDC, 2-20 mA, or PWM 10-100 %. The selection of the signal type can be done with the switch inside the controller. The ECS10-PWM IP54 has an enclosure for surface and flush-mounted installation. The power supply 230 VAC must be supplied to the controller ECS10-PWM IP54. For enabling the controlled device, the ECS10-PWM IP54 has a relay output. The minimum and maximum levels of the potentiometer output signal can be adjusted with installed trimmers.
TECHNICAL DATA
- The supply voltage: 230 VAC.
- The adjustable output signal is limited by a minimum and a maximum.
- The output: 230 VAC.
- The minimum setpoint range: 1-7 VDC, 2-10 mA, PWM 10-70 %.
- The maximum setpoint range: 3-10 VDC, 6-20 mA, PWM 30-100 %.
- Protection class: IP44/54. When installed in a flush-mounted box - IP44. When installed in an overhead box - IP54.
- Dimensions: 80x80x60 mm/ 80x80x65 mm with the surface box.
- The max. ambient temperature 40°C.
- The max. ambient humidity 90% without the condensation.
