Electronic controller REC50B for electric heating
The controller REC50B is intended to be used for electric heating control by a PID algorithm. Operation is managed in accordance with set and measured temperatures. If the measured temperature is lower than the set one, the controller gradually changes the pulse and pause time of the heater's power supply voltage in order to get a precise value of the set temperature. The REC50B has 1 relay output for extra load control if the heater has more than 1 step.
Working mode:
- With one sensor (supply air temperature control).
- With two sensors (the regulating extract/room air temperature according to the setpoint supply air temperature limiting).
- With an external control signal 0-10VDC.
TECHNICAL DATA
- Power supply: 3 phases 400VAC, 350..425 VAC.
- Controlled load with triacs: up to 50A, 3~ 400VAC/max.32,89 kW.
- Extra load controlled by relay output with contactor (not included): 3~ 400VAC, up to 24kW.
- Frequency: 50/60 Hz.
- Protection class: IP20.
- Dimensions: 240x168x140 mm.
- Max. ambient temperature: +30°C.
- Storage temperature: -35+50°C.
- Temperature setpoint: 0..+30°C or 0..+60°C (can be set in programming menu).
